"""
Ramp-histogram INL/DNL analysis for ADC output codes.
This method assumes a slow monotonic linear ramp sampled uniformly in time.
Under that assumption, the number of samples landing in each output code is
proportional to that code's input width.
"""
from __future__ import annotations
import numpy as np
def _validate_code_limits(
num_bits: int | None,
code_min: int,
code_max: int | None,
) -> tuple[int | None, int, int | None]:
if num_bits is not None:
if not isinstance(num_bits, (int, np.integer)) or num_bits <= 0:
raise ValueError(f"num_bits must be a positive integer, got {num_bits!r}")
num_bits = int(num_bits)
if not isinstance(code_min, (int, np.integer)):
raise ValueError(f"code_min must be an integer, got {code_min!r}")
code_min = int(code_min)
if code_max is None:
if num_bits is None:
return num_bits, code_min, code_max
code_max = code_min + 2**num_bits - 1
elif not isinstance(code_max, (int, np.integer)):
raise ValueError(f"code_max must be an integer, got {code_max!r}")
code_max = int(code_max)
if code_max < code_min:
raise ValueError(f"code_max must be >= code_min, got {code_max} < {code_min}")
return num_bits, code_min, code_max
def _coerce_integer_codes(codes) -> np.ndarray:
codes_arr = np.asarray(codes)
if codes_arr.size == 0:
raise ValueError("codes must not be empty")
codes_flat = codes_arr.reshape(-1)
if not np.all(np.isfinite(codes_flat)):
raise ValueError("codes must be finite")
rounded = np.rint(codes_flat)
if not np.allclose(codes_flat, rounded, rtol=0.0, atol=0.0):
raise ValueError("codes must contain integer ADC codes")
return rounded.astype(np.int64)
def _correct_inl(raw_inl: np.ndarray, inl_code: np.ndarray, endpoint: str) -> np.ndarray:
if not isinstance(endpoint, str):
raise ValueError("endpoint must be one of 'fit', 'endpoints', or 'none'")
endpoint = endpoint.lower()
if endpoint == "none":
return raw_inl
if len(raw_inl) == 0:
return raw_inl
if endpoint in {"endpoint", "endpoints"}:
if len(raw_inl) == 1:
return raw_inl - raw_inl[0]
correction = np.linspace(raw_inl[0], raw_inl[-1], len(raw_inl))
return raw_inl - correction
if endpoint == "fit":
if len(raw_inl) == 1:
return raw_inl - raw_inl[0]
coeff = np.polyfit(inl_code.astype(float), raw_inl, deg=1)
return raw_inl - np.polyval(coeff, inl_code)
raise ValueError("endpoint must be one of 'fit', 'endpoints', or 'none'")
[文档]
def compute_inl_from_ramp(
codes,
num_bits: int | None = None,
code_min: int = 0,
code_max: int | None = None,
endpoint: str = "endpoints",
exclude_endpoints: bool = True,
) -> dict:
"""
Compute static INL/DNL from ADC output codes collected during a ramp test.
A linear monotonic ramp sampled at uniform time intervals gives uniform
spacing on the input-voltage axis. Therefore each code's histogram count is
proportional to that code's transition width. DNL is estimated as
``counts / mean(counts) - 1`` over the analyzed code range.
The mean count is the average over the analyzed code range, not an
independently known full-scale 1 LSB width. This is unbiased for a full
range ramp with uniform sampling, but a partial-range ramp reports DNL
relative to that partial range's average code width.
The returned ``inl`` is transition-level INL: if ``dnl`` has one value per
analyzed output code, ``inl`` has one value per transition bounding those
code widths, so ``len(inl) == len(dnl) + 1``. Raw transition INL is
``[0, cumsum(dnl)]``, matching the standard relation
``INL[k] = sum(DNL[:k])``. The default ``endpoint='endpoints'`` removes the
line through the first and last raw INL samples, so the corrected endpoint
INL starts and ends at zero. Use ``endpoint='fit'`` for best-fit-corrected
INL, or ``endpoint='none'`` for raw transition INL.
This function does not verify that ``codes`` came from a linear monotonic
ramp. Non-ramp or non-uniformly swept data will produce mathematically
valid histogram numbers, but they are not meaningful ramp DNL/INL.
Parameters
----------
codes : array_like
Integer ADC output codes from a ramp simulation or measurement.
num_bits : int, optional
ADC resolution. When provided and ``code_max`` is omitted, the analyzed
full range is ``code_min`` through ``code_min + 2**num_bits - 1``.
code_min : int, default=0
Lowest allowed ADC code.
code_max : int, optional
Highest allowed ADC code. If omitted with ``num_bits=None``, it is
inferred from the maximum observed code.
endpoint : {'endpoints', 'fit', 'none'}, default='endpoints'
INL baseline correction. ``'endpoints'`` removes the line through the
first and last raw transition-INL samples. ``'fit'`` removes a best-fit
line from the raw transition INL. ``'none'`` returns raw transition INL.
exclude_endpoints : bool, default=True
Exclude the lowest and highest codes from the reported DNL/INL. This is
useful for ramp captures where the first and last codes are only
partially exercised by the ramp start/stop points.
Returns
-------
dict
Dictionary with ``code``, ``counts``, ``dnl``, ``transition_code``,
``inl``, ``missing_codes``, and summary metrics such as ``dnl_min`` and
``inl_pp``.
"""
num_bits, code_min, code_max = _validate_code_limits(num_bits, code_min, code_max)
codes_int = _coerce_integer_codes(codes)
if code_max is None:
code_max = int(np.max(codes_int))
if code_max < code_min:
raise ValueError(f"observed codes are below code_min={code_min}")
if np.any((codes_int < code_min) | (codes_int > code_max)):
raise ValueError(
f"codes must be within [{code_min}, {code_max}] for ramp INL/DNL analysis"
)
full_code = np.arange(code_min, code_max + 1, dtype=np.int64)
full_counts = np.bincount(
codes_int - code_min,
minlength=len(full_code),
)[:len(full_code)].astype(float)
if exclude_endpoints and len(full_code) > 2:
analyzed_slice = slice(1, -1)
else:
analyzed_slice = slice(None)
code = full_code[analyzed_slice]
counts = full_counts[analyzed_slice]
if counts.size == 0 or np.sum(counts) == 0:
raise ValueError("no ramp samples remain in the analyzed code range")
ideal_count = float(np.mean(counts))
if ideal_count <= 0:
raise ValueError("ideal code count must be positive")
dnl = counts / ideal_count - 1.0
dnl = np.maximum(dnl, -1.0)
transition_code = np.arange(code[0], code[-1] + 2, dtype=np.int64)
raw_inl = np.concatenate(([0.0], np.cumsum(dnl)))
inl = _correct_inl(raw_inl, transition_code, endpoint)
missing_codes = code[counts == 0].astype(int)
return {
"code": code.astype(int),
"counts": counts.astype(int),
"dnl": dnl,
"transition_code": transition_code.astype(int),
"inl": inl,
"raw_inl": raw_inl,
"missing_codes": missing_codes,
"ideal_count": ideal_count,
"dnl_min": float(np.min(dnl)),
"dnl_max": float(np.max(dnl)),
"dnl_pp": float(np.max(dnl) - np.min(dnl)),
"inl_min": float(np.min(inl)),
"inl_max": float(np.max(inl)),
"inl_pp": float(np.max(inl) - np.min(inl)),
"endpoint": endpoint,
"exclude_endpoints": bool(exclude_endpoints),
"code_min": int(code_min),
"code_max": int(code_max),
"num_bits": num_bits,
}
